2017-05-15 10:51:30

Die casting materials

He main Die Casting alloys are: zinc, aluminium, magnesium, copper, lead, and tin. Specific Die Casting alloys include: ZAMAK, zinc aluminium, AA 380, AA 384, AA 386, AA 390, and AZ91D magnesium. The following is a summary of the advantages of each alloy:
6515220090619201354_s.jpg
Aluminium alloy die casting
Material: aluminium(A380;ADC12,ect.) & Aluminum Alloy Process: pressure die casting & gravity casting Surface Treatment:  anodizing Specification: Heat Sink Used for Automobile cars

6182020090619195612_s.jpg

Zinc die casting of machine part
Material: Zinc or Zinc Alloy Process: pressure die casting & gravity casting Surface Treatment:  nature Used for Agricultural machines; lifting machines; grinding machines; medical machines


Zinc: the easiest alloy to cast; high ductility; high impact strength; easily plated; economical for small parts; promotes long die life.
Aluminium: lightweight; high dimensional stability for complex shapes and thin walls; good corrosion resistance; good mechanical properties; high thermal and electrical conductivity; retains strength at high temperatures.
Magnesium: the easiest alloy to machine; excellent strength-to-weight ratio; lightest alloy commonly die cast.
Copper: high hardness; high corrosion resistance; highest mechanical properties of alloys die cast; excellent wear resistance; excellent dimensional stability; strength approaching that of steel parts.
Lead and Tin: high density; extremely close dimensional accuracy; used for special forms of corrosion resistance.

Maximum weight limits for aluminium, brass, magnesium, and zinc castings are approximately 70 pounds (32 kg), 10 lb (5 kg), 44 lb (20 kg), and 75 lb (34 kg), respectively.



The material used defines the minimum section thickness and minimum draft required for a casting as outlined in the table below.

MetalMinimum sectionMinimum draft
Aluminium alloys0.89 mm (0.035 in.)1:100 (0.6°)
Brass and bronze1.27 mm (0.050 in.)1:80 (0.7°)
Magnesium alloys1.27 mm (0.050 in.)1:100 (0.6°)
Zinc alloys0.63 mm (0.025 in.)1:200 (0.3°)

Related Products: Sand casting Manufacturer, Sand Cast Molten Metal, Metal Casting, What is a Sand Casting, Sand Casting

 
Prev : Resin Sand Casting    Next: The process of Investment casting